Home Shield BituSeal DPC is an elastomeric, liquid applied, emulsified asphalt membrane designed for damp- proofing of concrete structures of below & above ground levels.

Specifications

In The Box

1. 1 Bituseal DPC

1. 1

General

1. Berger

1. Bituseal DPC Damp Proofing of concrete structures below & above ground levels

1. 20 L

1. Gel

1. Outdoor, Indoor

1. Damp-proofing of concrete structures., Moisture barrier coating on the concrete surface.

1. Roller, Brush

1. Drum

1. No

1. For damp- proofing of concrete structures of below & above ground levels

1. Black

1. 4 hr

1. 30 min

1. >5°C

1. NA

1. Low

1. 35 %

1. • Avoid contact with skin / eyes and avoid swallowing., • Ensure adequate ventilation and avoid inhalation of vapor., • Wear suitable protective clothing, gloves and eye protection., • In case of contact with skin, rinse with plenty of clean water, then cleanse with soap and water. Do not use solvent to clean the contacted area., • In case of eye contact, wash immediately with plenty of clean water and seek medical advice., • If swallowed seek medical attention immediately. Do not induce vomiting.

1. • Apply Home Shield BituSeal DPC by brush / roller on primed surface @ 0.25 liter / m² as first coat., • Allow the first coat to dry and apply second coat of Home Shield BituSeal DPC @ 0.25 liter / m² in a direction perpendicular to the first. An optional third coat after drying of the previous may be applied., • Overall coverage shall depend on application and surface finish of substrate.

1. 20 kg

1. 20 L